Specification:
Voltage:DC12V
The maximum load power:24W
LED chip:SMD2835
Light color:white
The dimming range:8-100%
Induction distance:5-10CM
Sensor shell color:milky coating
Switch type:hand wave sensor
Strips IP rating:IP65
Sensor IP rating:IP20
Operation Temperature: -20â„?~+55â„?
Material:PC
Sensor size:45*25*10.5mm
Strips length:3M
Feature:
1.Turn down/turn off: The light is off after connect the power supply. When the hand wave from the inducing area(vertical dimension 1-8cm),the light is turn on. And wave again, the light is turn down.
2.Brightness adjustment: The brightness of light could be adjusted freely from 8% to 100%.When the hand stay on the inducing area above, the light will get dimmer until minimum 8% brightness(Assuming the brightness of the light is 100%). And the hand stay on the inducing area above again, the light will get brightness until 100%. You can leave your hand when get you wanted brightness also.
3.Simple and easy to install.
4.Application area:cabinet, cest, wall cabinet, lift, corridor and so on.
 
NOTE:
1.Avoid the sensor getting wet.
 
Package included:
1*LED light strip
1*hand wave sensor
1*instruction
1*adapter