Specification:
Voltage:AC220-240V 50Hz
Wattage:1200W(incandescentlamp), 120W(energy-savinglamp, LED light)
Ambient light:3-2000Lux(adjustable)
Detection angle:360°
Sensor distance:3-12M(24â„?)(adjustable)
Delay time:min. 7±2s max. 7±2min (adjustable)

Feature:
1.Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
2.SENS adjustable: It can be adjusted according to using location; low sensitivity with 3m for detection distance;high sensitivity with 6 or 12m, it fits for large room.
3.Time-Delay is added continually:When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
4.Time-Delay is adjustable. It can be set according to the consumer's desire. The minimum time is 7sec±2sec. The maximum is 7min±2min.
Test:
1.Turn the LUX knob clockwise on the maximum(sun),turn the TIME knob anti-clockwise on the minimum, turn the SENS knob clockwise on the maximum.
2.When you switch on the power, the controlled load and indication lamp are both not working. Preheat 30 seconds later, the load and the indicator lamp are turned on synchronization, in the absence of no inductor signals, the load should be stopped working within 5-30sec, the indicator lamp is turned off.
3.After the first is out, make it sense again after 5~10sec. The load should work. When there is no inductor signals in the indicator lamp, the load should be stopped working within 5-15sec.
4.Turn ambient light knob anti-clockwise on the minimum. If it is adjusted in the less than 3LUX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.
Note:
When testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!
Package included:
1*motion sensor switch